2 FlexGripper-Vacuum2.3.3. Adjustment313HAC040633-002 Revision: -2.3.3. AdjustmentOn delivery, the width is set wide enough to make mounting of the FlexGripper possiblewithout the need to separate the vacuum rails and the pallet hook.The width between the two rails can be adjusted to fit different sized work pieces. If needed,please refer to the following instructions to adjust the width between the two rails accordingto the size of the product.Adjustment instructionsDANGER!Turn off all electric power and pneumatic pressure supplies to the gripper!No Action Info/Illustration1. Release the air pipe from thecompressed air hose.en19170012. Loosen the screws holding therails, the width between thetwo rails can be adjusteddepending on the size of theproducts.en10110113. Adjust the length of the airpipe and reconnect them withthe compressed air hose.
