2 FlexGripper-Vacuum2.5.7. Dress cable3HAC040633-002 Revision: -642.5.7. Dress cableThe dress cable is located as shown in the figure below.en1012020Use this procedure to remove the dress cable magnetic proximity switch.DANGER!Turn off all electric power and pneumatic pressure supplies to the gripper!Position PartA Electrical cableB Main compressed air hoseC Corrugated pipe clipD Dress cableAction Note1. Drain the air from the cylinder. Disconnect the aircable2. Pull out the main compressed air hose from the two sidequickconnectors.3. Pull out the electrical cable from both side( one side-Gripperterminal box, the other side-Robot axis 6).4. Open the corrugated pipe clip.5. Remove the dress cable.
