130BE915.10Illustration 4.21 Parameter Shortcut4.4.4 Alarm Log KeyWhen the [Alarm Log] key is pressed, the Alarm Log screenis shown (see chapter 4.3.6 Alarm Log). If the Alarm Logscreen is already active when the [Alarm Log] key ispressed, the latest alarm is highlighted (1st in the list).4.4.5 Back KeyThe [Back] key has no functionality when the Status screenis shown – both in Hand On mode and in Auto On mode.The [Back] key leads to the previous layer in the navigationstructure when the Main Menu screen is shown, and whilebrowsing through the device parameters.If the [Back] key is pressed while editing the value of aparameter, the new value of the parameter is discardedand the edit mode is exited.When the Alarm Log screen is shown, the [Back] keyactivates the previously shown screen (Status screen orMain Menu screen).When the Info screen is shown for a parameter or alarm(see chapter 4.4.7 Info Key), the [Back] key closes the Infoscreen and shows the previous screen.4.4.6 Cancel KeyIf the [Cancel] key is pressed while changing the value of aparameter via the Main Menu, the previous value of theparameter is restored. This cancel functionality can beperformed because the display has not been changed (forexample, browsing through other parameters, or switchingto another screen).When the Info screen is shown for a parameter or alarm(see chapter 4.4.7 Info Key), the [Cancel] key closes the Infoscreen and shows the previous screen.The [Cancel] key has no functionality when:• The Status screen is shown – both in Hand Onmode and in Auto On mode.• The Main Menu screen is shown.• Browsing through the device parameters.• The Alarm Log screen is shown.The cancel/undo functionality is not possible afternavigating away from the changed parameter.4.4.7 Info KeyThe [Info] key activates the Info screen, which showscontext-sensitive information. When the Status screen isshown – both in Hand On mode and in Auto On mode, the[Info] key shows the Status info screen. This shows thenames and locations of the selected readout parameters(see Illustration 4.22).130BE900.10Illustration 4.22 Status Info Screens AutoOn_1 and AutoOn_2When the Main Menu screen is active and currentlyshowing a parameter, press the [Info] key to show theparameter info screen. It shows the name, value, and helptext for the selected parameter (see Illustration 4.23).130BE910.10Illustration 4.23 Info Screen for a ParameterWhen the Main Menu screen is active and currentlyshowing a parameter group, press the [Info] key to showthe Parameter Group info screen. It shows the name of theselected group.When the Alarm Log screen is active and an alarm ishighlighted, press the [Info] key to show the alarm infoLocal Control Panel (LCP) O... Programming GuideMG36D102 Danfoss A/S © 01/2017 All rights reserved. 1054 4
