Attribute ValueLCP parameter number 16-10Access Read onlyPDO mapping YesUnit WattTable 8.11 Object 0x2008: ISD Power Consumption8.7 Object 0x2009: Fan Speed Power CardThis object shows the speed of the fan on the power cardas a percentage value (0–100%).Attribute ValueIndex 0x2009Description Fan speed power cardObject code VarData type UNSIGNED16Unit %Sub-index 0x00LCP parameter number 51-61Access Read onlyValue range 0–100PDO mapping YesTable 8.12 Object 0x2009: Fan Speed Power Card8.8 Object 0x200D: Relay 1 ControlThis object configures the function of relay 1 with the onand off delay times. The valid configuration values aredetailed in Table 3.2 in chapter 3.2.1 Relay Outputs.Attribute ValueIndex 0x200DDescription Relay 1 ConfigObject code RecordSub-index 0x00Description Number of entriesAccess Read onlyPDO mapping NoValue range 0x03Default value 0x03Sub-index 0x01LCP parameter number 05-40Description Relay 1 ConfigAccess Read/writePDO mapping NoObject code VarData type UNSIGNED16Value range See Table 3.2 in chapter 3.2.1 RelayOutputs.Default value 0Attribute ValueSub-index 0x02LCP parameter number 05-41Description Relay 1 on delayAccess Read/writePDO mapping NoObject code VarData type UNSIGNED16Unit SecondsValue range 0–600Default value 0Sub-index 0x03LCP parameter number 05-42Description Relay 1 off delayAccess Read/writePDO mapping NoObject code VarData type UNSIGNED16Unit SecondsValue range 0–600Default value 0Table 8.13 Object 0x200D: Relay 1 Control8.9 Object 0x200E: Relay 2 ControlThis object configures the function of relay 2 with the onand off delay times. The valid configuration values aredetailed in Table 3.2 in chapter 3.2.1 Relay Outputs.Attribute ValueIndex 0x200EDescription Relay 2 ConfigObject code RecordSub-index 0x00Description Number of entriesAccess Read onlyPDO mapping NoValue range 0x03Default value 0x03Sub-index 0x01LCP parameter number 05-40Description Relay 2 ConfigAccess Read/writePDO mapping NoObject code VarData type UNSIGNED16Value range See Table 3.2 in chapter 3.2.1 RelayOutputs.Default value 0Sub-index 0x02LCP parameter number 05-41SAB Parameter Description Programming GuideMG36D102 Danfoss A/S © 01/2017 All rights reserved. 3618 8
