4 Local Control Panel (LCP) Operation4.1 OverviewThe LCP is the graphical user interface on the SAB fordiagnostic and operating purposes. It is included asstandard with the SAB but can also be connected to theadvanced servo drives using an optional cable(M8 to LCP D-SUB extension cable).The LCP display provides the operator with a quick view ofthe state of the servo drive or SAB, depending on whichdevice it is connected to. The display shows parametersand alarms/errors and can be used for commissioning andtroubleshooting. It can also be used to perform simplefunctions, for example activating and deactivating theoutput lines on the SAB.The LCP can be mounted on the front of the controlcabinet and then connected to the SAB via a SUB-D cable(available as an accessory).4.2 Local Control Panel (LCP) LayoutThe local control panel is divided into 4 functional groups(see Illustration 4.1).A. Display area.B. Display menu keys.C. Navigation keys and indicator lights (LEDs).D. Operation keys and reset.A. Display areaThe values in the display area differ depending on whetherthe LCP is connected to an ISD 510 servo drive or the SAB,as shown in Illustration 4.1 and Illustration 4.2.The display area is activated when the servo drive or SABit is connected to receives power from the mains supply, aDC bus terminal, or UAUX.130BE692.11AutoOn ResetHandOn OffStatus QuickMenuMainMenuAlarmLogBackCancelInfoOKStatus271°2850 RPMOnAlarmWarn.A38 °C3.1 NmBCD1.8 A123456789101112131415161718 19 20 21CalloutnumberDescription1 Actual torque2 Temperature module3 Position4 Speed5 CurrentIllustration 4.1 Display Area when Connected to an ISD 510Servo DriveLocal Control Panel (LCP) O... VLT® Integrated Servo Drive ISD® 510 System94 Danfoss A/S © 01/2017 All rights reserved. MG36D10244
