Parameter Descriptionspecial characters, you must also put quotationmarks (" ") around the virtual disk name.consistencyErrorFile Name of the file in which to save the consistencyerror information. You must put quotation marks(" ") around the file name.mediaErrorFile Name of the file in which to save the media errorinformation. You must put quotation marks (" ")around the file name.priority Specifies the priority that the consistency checkhas relative to host I/O activity. Valid entries arehighest, high, medium, low, or lowest.startingLBA The starting logical block address. Use integervalues.endingLBA The ending logical block address. Use integervalues.verbose Captures progress details, such as percentcomplete, and shows the information while virtualdisk consistency is being repaired. To captureprogress details, set this parameter to TRUE. Toprevent capturing progress details, set thisparameter to FALSE.NOTE: The starting logical block address and the ending logical block address are useful for verylarge single-virtual disk LUNs. Running a virtual disk consistency check on a very large single-virtualdisk LUN can take a long time. By defining the beginning address and ending address of the datablocks, you can reduce the time that a virtual disk consistency check takes to complete.Clear Physical Disk Port StatisticsDescriptionThis command resets the statistics for all physical disk ports.Syntaxclear allPhysicalDiskChannels statsParametersNone.148
