Parameter Descriptionpath. The connectivity test sends an inter-RAIDcontroller module message between thestorage arrays, and then validates that thecorresponding remote replication group on theremote storage array exists. It also validates thatthe virtual disk members of the remotereplication group on the remote system matchthe virtual disk members of the remotereplication group on the local system.• Latency—Sends a SCSI test unit command toeach virtual disk on the remote storage arrayassociated with the remote replication group totest the minimum, average, and maximumlatency.• Bandwidth—Sends two inter-RAID controllermodule messages to the remote storage arrayto test the minimum, average, and maximumbandwidth as well as the negotiated link speedof the port on the RAID controller moduleperforming the test.• Port connections—Shows the port that isbeing used for replicating on the local storagearray and the port that is receiving thereplicated data on the remote storage array.Validate Storage Array Security KeyDescriptionThis command validates the security key for a storage array that has self-encrypting disk physical disks tomake sure that the security key is not corrupt.Syntaxvalidate storageArray securityKeyfile="fileName"passPhrase="passPhraseString"ParametersParameter Descriptionfile The file path and the file name to which you wantto save the security key. For example,file="C:\Program Files\CLI\sup\seckey.slk"NOTE: You must add a file extension of .slk tothe end of the file name.passPhrase A character string that encrypts the security key sothat you can store the security key in an externalfile.386
