Syntaxclear (allVirtualDisks | virtualDisk [virtualDiskName]| virtualDisks [virtualDiskName1... virtualDiskNameN])reservationsParametersParameter DescriptionallVirtualDisks Clears reservations on all virtual disks in thestorage array.virtualDisk or virtualDisks Name of the specific virtual disk for which to clearreservations. You can enter more than one virtualdisk name. You must put brackets ([ ]) around thevirtual disk name. If the virtual disk name hasspecial characters, you must also put quotationmarks (" ") around the virtual disk name.NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for thenames. Command names can have a maximum of 30 characters. If you exceed the maximumcharacter limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.Clear Virtual Disk Unreadable SectorsDescriptionThis command clears the unreadable sector information from one or more virtual disks.Syntaxclear (allVirtualDisks | virtualDisk[virtualDiskName] | virtualDisks [virtualDiskName1... virtualDiskNameN]) unreadableSectorsParametersParameter DescriptionallVirtualDisks Clears unreadable sector information from all of the virtual disksin the storage array.virtualDisk or virtualDisks The name of the specific virtual disk for which you want to clearunreadable sector information. You can enter more than onevirtual disk name. Enclose the virtual disk name in squarebrackets ([ ]). If the virtual disk name has special characters, youalso must enclose the virtual disk name in double quotationmarks (“ ”).153
