ParametersParameter DescriptionvirtualDisk The name of the specific virtual disk for which youwant to define mapping. Enclose the virtual diskname in double quotation marks (" ") inside ofsquare brackets ([ ]).The World Wide Identifier (WWID) of the virtual diskfor which you are setting properties. You can usethe WWID instead of the virtual disk name toidentify the virtual disk. Enclose the WWID in anglebrackets (< >).accessVirtualDisk The logical unit number for the virtual disk. Thelogical unit number is the only property that youcan set for the virtual disk.logicalUnitNumber The logical unit number that you want to use tomap to a specific host. This parameter also assignsthe host to a host group.host The name of the host to which the virtual disk ismapped. Enclose the host name in doublequotation marks (" ").hostGroup The name of the host group to which the virtualdisk is mapped. Enclose the host group name indouble quotation marks (" "). defaultGroup is thehost group that contains the host to which thevirtual disk is mapped.NotesA host group is an optional topological element that you can define if you want to designate a collectionof hosts that share access to the same virtual disks. The host group is a logical entity. Define a host grouponly if you have two or more hosts that can share access to the same virtual disks.You can use any combination of alphanumeric characters, hyphens, and underscores for the names.Names can have a maximum of 30 characters.The access virtual disk is the virtual disk in a SAN environment that is used for in-band communicationbetween the storage management software and the storage array RAID controller module. This virtualdisk uses a LUN address and consumes 20 MB of storage space that is not available for application datastorage. An access virtual disk is required only for in-band managed storage arrays. If you specify theaccessVirtualDisk parameter, the only property you can set is the logicalUnitNumber parameter.Show Consistency Group Snapshot ImageDescriptionThis command shows one snapshot image or several snapshot images that are in one or more snapshotconsistency groups.321
