ParameterParameter DescriptionphysicalDisk Identifies the enclosure and slot where, thephysical disk resides. Enclosure ID values are 0 to99. Slot ID values are 0 to 31. You must putbrackets ([ ]) around the enclosure ID value and theslot ID value.Revive Snapshot GroupDescriptionThis command forces the specified snapshot group to the Optimal state. If the snapshot group is not in aFailed state, the firmware displays an error message and does not run this command.Syntaxrevive snapGroup [snapGroupName]ParameterParameter DescriptionsnapGroup The alphanumeric identifier (including - and _) ofthe snapshot group that you want to set to theOptimal state. Enclose the snapshot groupidentifier in square brackets ([ ]).Revive Snapshot Virtual DiskDescriptionThis command forces a specified snapshot virtual disk to the Optimal state. The snapshot virtual disk canbe:• A standalone snapshot virtual disk• A snapshot virtual disk that is a member of a consistency groupIf the snapshot virtual disk is not in a Failed state, the firmware displays an error message and does notrun this command.NOTE: You cannot use this command for a snapshot virtual disk that is used in online virtual diskcopy.Syntaxrevive snapVirtualDisk [snapVirtualDiskName]254
