file=fileName |commitSecurityKey=(TRUE | FALSE)ParametersParameter DescriptionkeyIdentifier A character string that you can read that is awrapper around a security key.passPhrase A character string that encrypts the security key sothat you can store the security key in an externalfile.file The file path and the file name to which you wantto save the security key. For example,file="C:\Program Files\CLI\sup\seckey.slk"NOTE: You must add a file extension of .slk tothe end of the file name.commitSecurityKey This parameter commits the security key identifierto the storage array for all SES drives as well as thecontrollers. After the security key identifier iscommitted, a key is required to read data or writedata. The data can only be read or changed byusing a key, and the drive can never be used in anonsecure mode without rendering the datauseless or totally erasing the drive.Additional InformationTo use this command successfully, you need to have enough SES drives to create atleast one disk group.The controller firmware creates a lock that restricts access to the SES drives. SES drives have a statecalled Security Capable. When you create a security key, the state is set to Security Enabled, whichrestricts access to all SES drives that exist within the storage array.You can have a storage array configuration with more than one set of encrypted disk groups. Each diskgroup can have a unique security key. The character string generated by the keyIdentifier parameteris a string that you can read and that enables you to identify the security key that you need. You cancreate a keyIdentifer by using one of these methods:• You can enter up to 189 alphanumeric characters for a key identifier. The key identifier cannot havethese characters:– White spaces– Punctuation– Symbols• You can leave out this parameter.Additional characters are automatically generated and appended to the end of the string that you enterfor the key identifier. If you do not enter any string for the keyIdentifier parameter, the key identifierconsists of only the characters that are automatically generated.Your pass phrase must meet these criteria:196
