Parameter DescriptionphysicalDiskType The type of physical disk for which you want toretrieve information. The valid physical disk type isSAS.physicalDisk or physicalDisks Identifies the enclosure and slot where the physicaldisk resides. You can enter enclosure IDs and slotIDs for one or several physical disks. Enclosure IDvalues are 0 to 99. Slot ID values are 0 to 31. Youmust put parentheses around the enclosure IDvalues and the slot ID values.summary Returns the status, capacity, data rate, product ID,and firmware version for the specified physicaldisks.NOTE: To determine the type of physical diskin a specific location, use the physicalDiskparameter, and enter the enclosure and slotIDs for the physical disk.Show Physical Disk Channel StatisticsDescriptionThis command shows cumulative physical disk channel data transfer and error information. If the RAIDcontroller module has automatically degraded a channel, this command also shows interval statistics.When using this command, you can display information about one specific physical disk channel, severalphysical disk channels, or all physical disk channels.Syntaxshow (physicalDiskChannel [(1 | 2)] |physicalDiskChannels [1 2] | allPhysicalDiskChannels) statsParametersParameter DescriptionphysicalDiskChannel Identifier number of the physical disk port forwhich to display information. Valid physical diskport values are 1 or 2. You must put brackets ([ ])around the physical disk channel values.physicalDiskChannels Identifier number of the physical disk ports forwhich to display information. Valid physical diskport values are 1 or 2. You must put brackets ([ ])around the physical disk channel values.allPhysicalDiskChannels The identifier that selects all of the physical diskports.328
