Show Storage Array Negotiation DefaultsDescriptionThis statement returns information about connection-level settings that are subject to initiator-targetnegotiation.Syntaxshow storageArray iscsiNegotiationDefaultsParametersNone.NOTE: Information returned includes RAID controller module default settings (settings that are thestarting point for negotiation), and the current active settings.Show Storage Array Unconfigured iSCSI InitiatorsDescriptionThis command returns a list of initiators that have been detected by the storage array but are not yetconfigured into the storage array topology.Syntaxshow storageArray unconfiguredIscsiInitiatorsParametersNone.Show Storage Array Unreadable SectorsDescriptionThis command returns a table of the addresses of all of the sectors in the storage array that cannot beread. The table is organized with column headings for the following information:• Virtual disk user label• Logical unit number (LUN)• Accessible by (host or host group)• Date/time• Virtual disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)• Physical disk location (enclosure t, slot s)• Physical disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)• Failure type347
