Set Snapshot Virtual Disk Repository Virtual Disk CapacityDescriptionThis command defines the capacity the you can set for a snapshot virtual disk repository virtual disk.Syntaxset snapVirtualDisk ["snapVirtualDiskName"](repositoryFullLimit=percentValue |increaseRepositoryCapacity (repositoryVirtualDisk=(repos_xxxx) |decreaseRepositoryCapacity count=numberOfVirtualDisks)ParametersParameters DescriptionsnapVirtualDisk The alphanumeric identifier (including - and _) ofthe snapshot virtual disk for which you are settingproperties. Enclose the snapshot virtual diskidentifier in double quotation marks (" ") inside ofsquare brackets ([ ]).repositoryFullLimit The percentage of repository virtual disk capacityat which you receive a warning that the snapshotrepository virtual disk is nearing full. Use integervalues. For example, a value of 70 means 70percent. The default value is 75.repositoryVirtualDisk The alphanumeric identifier of the repository virtualdisk has the snapshot image. All repositoryidentifiers have this form: repos_xxxx wherexxxx represents a four digit numerical value.Enclose the snapshot virtual disk name in doublequotation marks (" ").count The number of repository virtual disks that youwant to remove from the snapshot group. Useinteger values.NotesWhen you use this command, you can specify only one of the parameters. You cannot enter more thanone parameter when you run this command.Set Storage ArrayDescriptionThis command defines the properties of the storage array.301
