Establish Remote Replicated PairDescriptionUse this command to complete a remote replicated pair on the remote storage array by adding asecondary virtual disk to an existing remote replication group. Before you run this command, the remotereplication group must exist and the primary virtual disk must exist in the remote replication group. Afterthis command successfully completes, remote replication starts between the primary virtual disk and thesecondary virtual disk.The two virtual disks comprising a remote replicated pair function as a single entity. Establishing a remotereplicated pair allows you to perform actions on the entire replicated pair versus the two individual virtualdisks.Syntaxestablish asyncRemoteReplication virtualDisk="secondaryVirtualDiskName"asyncRemoteReplicationGroup="asyncRemoteReplicationGroupName"primaryVirtualDisk="primayVirtualDiskName"ParametersParameter DescriptionasyncRemoteReplication The name of an existing virtual disk on the remotestorage array that you want to use for thesecondary virtual disk. Enclose the virtual diskname in double quotation marks (" ").asyncRemoteReplicationGroup The name of an existing remote replication groupthat you want to use to contain the remotereplicated pair. Enclose the remote replicationgroup name in double quotation marks (" ").primaryVirtualDisk The name of an existing virtual disk on the localstorage array that you want to use for the primaryvirtual disk. Enclose the virtual disk name in doublequotation marks (" ").NotesA remote replicated pair is comprised of two virtual disks, a primary virtual disk and a secondary virtualdisk, that contain identical copies of the same data. The replicated pair is a part of a remote replicationgroup, which allows the replicated pair to synchronize at the same time as any other replicated pairswithin the remote replication group.You can use any combination of alphanumeric characters, hyphens, and underscores for the names.Names can have a maximum of 30 characters.When you choose the primary virtual disk and the secondary virtual disk, the secondary virtual disk mustbe of equal or greater size than the primary virtual disk. The RAID level of the secondary virtual disk doesnot have to be the same as the primary virtual disk.224
