Eaton Network-M3 User Manual

SettingsContextual help of the web interface – 118HelppingThe ping utility uses the ICMP protocol's mandatory ECHO_REQUEST datagramto elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUESTdatagrams (``pings'') have an IP and ICMP header, followed by a ``structtimeval'' and then an arbitrary number of ``pad'' bytes used to fill outthe packet.-c Specify the number of echo requests to be sent-h Specify maximum number of hops or IP> Host name or IP addressping6The ping6 utility uses the ICMP protocol's mandatory ECHO_REQUEST datagramto elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUESTdatagrams (``pings'') have an IP and ICMP header, followed by a ``structtimeval'' and then an arbitrary number of ``pad'' bytes used to fill outthe packet.-c Specify the number of echo requests to be sent address> IPv6 addresstraceroute and traceroute6DescriptionTraceroute and traceroute6 utilities are for checking the configuration of the network.Helptraceroute-h Specify maximum number of hops or IP> Remote system to tracetraceroute6-h Specify maximum number of hops address> IPv6 address