Eaton Network-M3 User Manual

ControlsContextual help of the web interface – 48•••••3.4.3.2 Outlets - Group 1/ Group 2Load segmentations allow, battery runtime to remain on essential equipment and automatically power down non-priority equipmentduring an extended power outage.This feature is also used for remote reboot and the sequential start of servers to restrict inrush currents.3.4.3.2.1 StatusIt reflects the current outlet status.On — Protected/Not protectedOff — Not powered3.4.3.2.2 CommandsA set of commands are available and activated when one of the following buttons is pressed. A confirmation window appears.Safe OFFThis will shut off the load connected to the associated load segment. Protected applications are safely powered down.This control is available only if the status is not OFF and if there are no active commands running.Safe rebootThis will power down and then switch ON the load connected to the associated load segment. Protected applications aresafely powered down.This control is available only if the status is not OFF and if there are no active commands running.Switch ONThis will switch ON the load connected to the associated load segment.This control is available when status is OFF and if there are no active commands running.3.4.3.2.3 Pending actionDisplays the delay before shutdown and delay before startup.3.4.3.3 Access rights per profilesAdministrator Operator ViewerControl