Eaton Network-M3 User Manual

ControlsContextual help of the web interface – 513.4.4.4 Save and RestoreSRR section Settings Possible valuesScheduled shutdown schedule enabled true/falsescheduler 1: Primary2: Group 13: Group 2recurrence 0: once1: every day2: every weekshutdownTimeStamp [timestamp (unix)]restartTimeStamp [timestamp (unix)]3.4.4.4.1 Additional information3.4.4.5 TroubleshootingAction not allowed in Control/Schedule/Power outage policySymptomBelow message is displayed when you access the Control, Schedule or Power outage policy page.This action is not allowed by the UPS.To enable it, please refer to the user manual of the UPS and its instructions on how to configure the UPS settings and allowremote commands.Possible Cause1- Remote commands are not allowed due to the UPS configuration (see the action below)2- The UPS does not support remote commands.ActionRefer to the UPS user manual and its instruction on how to configure the UPS settings and allow remote commands.Example: UPS menu Settings>>>ON/OFF settings>>>Remote command>>>Enable.For details on Save and Restore, see the Save and Restore section.