Eaton Network-M3 User Manual

CLIInformation – 2757.7.8.2 HelppingThe ping utility uses the ICMP protocol's mandatory ECHO_REQUEST datagramto elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUESTdatagrams (``pings'') have an IP and ICMP header, followed by a ``structtimeval'' and then an arbitrary number of ``pad'' bytes used to fill outthe packet.-c Specify the number of echo requests to be sent-h Specify maximum number of hops or IP> Host name or IP addressping6The ping6 utility uses the ICMP protocol's mandatory ECHO_REQUEST datagramto elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUESTdatagrams (``pings'') have an IP and ICMP header, followed by a ``structtimeval'' and then an arbitrary number of ``pad'' bytes used to fill outthe packet.-c Specify the number of echo requests to be sent address> IPv6 address7.7.8.3 Specifics7.7.8.4 Access rights per profilesAdministrator Operator Viewerpingping67.7.9 reboot7.7.9.1 DescriptionTool to Reboot the card.7.7.9.2 HelpUsage: reboot [OPTION] Reboot the card--help Display help--withoutconfirmation Reboot the card without confirmation