Eaton Network-M3 User Manual

SettingsContextual help of the web interface – 85•••••••Server IP/Hostname – Enter the host name or IP address of the SMTP server used to transfer email messages in the SMTPServer field.PortDefault sender addressHide the IP address from the email body – Disabled/EnabledIf Enabled, it will force this setting to Enabled in the Email notification settings.Secure SMTP connection – Verify certificate authoritySMTP server authentication – Username/Password ( Read below note for Gmail Configuration regarding the password )Select the SMTP server authentication checkbox to require a user name and a password for SNMP authentication, enter theUsername and the Password.Save and test server configuration3.7.1.6 Default settings and possible parameters - GeneralDefault setting Possible parametersSystem details Location — emptyContact — emptySystem name — emptyTime & date settings — Manual (Time zone: Europe/Paris)Location — 31 characters maximumContact — 255 characters maximumSystem name — 255 characters maximumTime & date settings — Manual (Time zone: selection onmap/Date) / Dynamic (NTP)1.2.3.4.5.6.7.Gmail UsersGoogle no more allow the card to send email using your Gmail account password, but requires you to use adedicated "App passwords" instead.To proceed, you need first to enable a 2-Step Verification on your Google account.Then you need to follow these steps to generate an "App password" that you'll be required to configure SMTPserver authentication in the card (instead of your google account usual password):Go to https://security.google.com/settings/security/apppasswords and sign in to your account.Choose Mail from the list of available apps.Choose Other from the device list.Enter your Custom Name. You can put any name such as ”my-card" in it.Click the Generate button.Copy the password and put in the password field. ( The same password can be reused across multiplecards)Be careful, this password cannot be recovered after clicking the "Done" button. If lost, you'll have toregenerate a new password & reapply it in the settings.Click the Done button, and that’s it.