Eaton Network-M3 User Manual

EnvironmentContextual help of the web interface – 68•••••••••••••Client server is not restartingSymptomUtility power has been restored, the UPS and its load segments are powered on, but the Client server does not restart.Possible CauseThe “Automatic Power ON” server setup setting might be disabled.ActionIn the server system BIOS, change the setting for Automatic Power ON to "Enabled".3.5.3.4.1 For other issues3.6 Environment3.6.1 Commissioning/Status3.6.1.1 Sensors commissioning/Status tableThe table displays the sensors commissioning information and includes the following details.NameLocation – location-position-elevationTemperatureHumidityDry contact #1 – Status and nameDry contact #2 – Status and nameCommunication – Connected/Lost with dates3.6.1.2 Actions3.6.1.2.1 Download sensors measuresPress the Download sensors measures button to download the sensors log file:If available, possible measures are listed below:Temperature of (in K, 1 decimal digit)Humidity of (in %, 1 decimal digit)Temperature of > (in K, 1 decimal digit)Humidity of (in %, 1 decimal digit)Temperature of (in K, 1 decimal digit)Humidity of (in %RH, 1 decimal digit)For details on other issues, see the Troubleshooting section.°C = K - 273.15°F = K x 9/5 -459.67