Eaton Network-M3 User Manual

ControlsContextual help of the web interface – 493.4.3.3.1 For other access rights3.4.3.4 TroubleshootingAction not allowed in Control/Schedule/Power outage policySymptomBelow message is displayed when you access the Control, Schedule or Power outage policy page.This action is not allowed by the UPS.To enable it, please refer to the user manual of the UPS and its instructions on how to configure the UPS settings and allowremote commands.Possible Cause1- Remote commands are not allowed due to the UPS configuration (see the action below)2- The UPS does not support remote commands.ActionRefer to the UPS user manual and its instruction on how to configure the UPS settings and allow remote commands.Example: UPS menu Settings>>>ON/OFF settings>>>Remote command>>>Enable.3.4.3.4.1 For other issues3.4.4 ScheduleUse Scheduled shutdowns to turn off either the UPS or individual load segments at a specific day and time.This feature is used for saving energy by turning off equipment outside of office hours or to enhance cybersecurity by poweringdown network equipment.If server shutdown scenarios are defined for any of the connected servers or appliances, they will be triggered before thecorresponding outlets are turned off as configured in shutdown settings.For other access rights, see the Information>>>Access rights per profiles section.For details on other issues, see the Troubleshooting section.