Eaton Network-M3 User Manual

Accessing the Network ModuleInstalling the Network Management Module – 12••2.5 Accessing the Network Module2.5.1 Accessing the web interface through Network2.5.1.1 Connecting the network cableConnect a standardgigabit compatible shielded ethernet cable (F/UTP or F/FTP) between the network connector on the Network Module and anetwork jack.2.5.1.2 Accessing the web interfaceSTEP 1 – On a network computer, launch a supported web browser. The browser window appears.STEP 2 – In the Address/Location field, enter https://[IP address] with the static IP address of the Network Module.STEP 3 – The login screen appears.STEP 4 – Enter the user name in the User Name field. The default user name is admin.STEP 5 – Enter the password in the Password field. The default password is admin.STEP 6 – The password must be changed at first login.STEP 7 – Click Login. The Network Module web interface appears.At first login:STEP 8 - Accept License Agreement. The Network Module web interface appears.2.5.2 Finding and setting the IP address2.5.2.1 Your network is equipped with a BOOTP/DHCP server (default)2.5.2.1.1 Read from the device LCDIf your device has an LCD, from the LCD’s menu, navigate to Identification>>>"COM card IPv4".Note the IP address of the card.Go to the section: Accessing the web interface through Network.Security settings in the Network Module may be in their default states.For maximum security, configure through a USB connection before connecting the network cable.It is highly recommended that browser access to the Network Module is isolated from outside access using afirewall or isolated network.Note: some older Devices may not be able to display the IP address even if they have an LCD. Please consult theDevice manual.