Eaton Network-M3 User Manual

Default settings and possible parametersInformation – 233••••••••••••••••RADIUS ConfigureActive – NoRetry number – 0Primary serverName – blankSecret – blankAddress – blankUDP port – 1812Time out – 3Secondary serverName – blankSecret – blankAddress – blankUDP port – 1812Time out – 3Users preferencesLanguage –EnglishTemperature unit – °C (Celsius)Date format – m/d/YTime format – hh:mm:ss (24h)ConfigureActive – Yes/NoRetry number – 0 to 128Primary serverName – 128 characters maximumAddress – 128 characters maximumSecret – 128 characters maximumUDP port – 1 to 65535Time out – 3 to 60Secondary serverName – 128 characters maximumAddress – 128 characters maximumSecret – 128 characters maximumUDP port – 1 to 65535Time out – 3 to 60Users preferencesLanguage – English, French, German,Italian, Japanese, Russian, SimplifiedChinese, Spanish, Traditional ChineseTemperature unit – °C (Celsius)Date format – MM-DD-YYYYTime format – hh:mm:ss (24h)Default settings and possible parameters - Network & ProtocolDefault setting Possible parametersIPV4 Mode — DHCP Mode — DHCP/Manual (Address/Netmask/Gateway)IPV6 Enable — checkedMode — DHCPEnabled — Active/InactiveMode — DHCP/Manual (Address/Prefix/Gateway)DNS/DHCP Hostname —device-[MAC address]Mode — DHCPHostname — 128 characters maximumMode :DHCP/Manual (Domain name/Primary DNS/Secondary DNS)Ethernet Configuration — Auto negotiation Configuration — Auto negotiation - 10Mbps - Halfduplex - 10Mbps - Full duplex - 100Mbps - Halfduplex - 100Mbps - Full duplex - 1.0 Gbps - FullduplexHTTPS Port — 443Disable Port 80 (http) - Not disabledPort — x-xxxDisable Port 80 (http) - Disabled