Chapter 6—Motor Protection128 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.comAdvanced Protection ParametersThis table contains parameters that are applicable to allprotections but are related to more advanced behavior.Table 31. ProtectionsParameter Units Min. Max. DefaultModbusRegister NotesAuto Reset Delay Sec 0 3600 180 1075 Time delay after a Fault Trip event occurs an auto-reset willbe attemptedBackspin Inhibit Time Sec 0 3600 0 1077 Anti-backspin inhibit time before a reset is allowedReset On Power Up Enable Disable Disable 1076 Enabled; perform a fault reset on power upDisabled; no actionAuto Reset Enable Disable Enable Disable 1072 Disabled; no auto reset functionalityEnabled; auto reset functionality is based on trip auto-resetbit selectionsAuto Reset Types 1073 Select Fault Trip Parameters to Auto ResetTrip Enable Checked Unchecked Unchecked 1000 User input bit field that is used to enable or disable aprotection function tripWarning Enable Checked Unchecked Unchecked 1002 Only protections enabled by checking the associated boxwill provide a warning when that condition occursPositive TemperatureCoefficient (PTC) (option)376 0 = No Fault1 = Overtemp2 = Shorted3 = OpenFault Trip Code 22
