Appendix D—Modbus Register MapPower Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com 3671087 Trip Indication Only Enable BYTE RW NVArray size: 4Default: 0x00, 0x00, 0x00,0x00BitfieldConfig CRCRun LockAdmin LockUSB LockBackup MemEnable trip indication only by selecting the box next to each protection toplace a check mark in it. Each protection selected will enable thoseprotections but will not cause the C445 control to drop out when tripoccurs, continued.1089 Shunt Trip Output Define BYTE RW NVArray size: 4Default: 0x00, 0x00, 0x00,0x00BitfieldConfig CRCRun LockAdmin LockUSB LockBackup MemEnables the “Shunt Trip” output for selected protections that areconfigured for “trip” or “trip indication only”.1091 Shunt trip pulse duration in ms UINT16 RW NVDefault: 200Range: 200 to 5000Units: mSecConfig CRCRun LockAdmin LockUSB LockBackup MemDuration of the shunt trip pulse in msTable 128. C445 Modbus Register Map, continuedRegister Name Attribute DescriptionBit Description Coil19 Stall 1739620 Phase rotation mismatch 1739721 PTC 1739822 Under voltage restart 1739923 Peak demand 1740024 HRGF pulse detection 17401Bit Description Coil0 Under voltage 174091 Over voltage 174102 Not Implemented 174113 Ground current fault 174124 Current phase loss 174135 Current unbalance 174146 Instantaneous over current 174157 Jam 174168 Power factor deviation 174179 Voltage phase loss 1741810 Voltage unbalance 1741911 Frequency deviation fast 1742012 Frequency deviation slow 1742113 Under current 1742214 High power 1742315 Low power 1742416 Reserved 1742517 Starts limit exceeded 1742618 Overload 1742719 Stall 1742820 Phase rotation mismatch 1742921 PTC 1743022 Under voltage restart 1743123 Peak demand 1743224 HRGF pulse detection 17433
