Appendix C—Optional Communication Cards224 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.comLED Status IndicatorsThe Ethernet Card includes indicators for the module status(MS) and Network Status (NS). The Module Status Indicatorstates are described in the table below.Table 86. Module Status IndicatorIndicator State Summary RequirementSteady Off No power If no power is supplied to device, the module status indicator shall be steady Off.Steady Green Device operational If the device is operating correctly, the module status indicator shall be steady greenFlashing Green Standby If the device has not been configured, the module status indicator shall be flashing green.Flashing Red Minor Fault If the device has detected a recoverable minor fault, the module status indicator shall be flashing red.Steady Red Major Fault If the device has detected a non-recoverable majorfault, the module status indicator shall be steady red.Table 87. Network Status IndicatorIndicator State Summary RequirementSteady Off Not Powered, No IPAddressThe device is powered off, or is powered on but with no IP address configured (Interface Configurationattribute of the TCP/IP Interface Object).Flashing Green No Connections An IP address is configured, but no CIP connections are established, and an Exclusive Owner connectionhas not timed out.Steady Green Connected At least one CIP connection (any transport class) is established, and an Exclusive Owner connection hasnot timed out.Flashing Red Connection Time-out An Exclusive Owner connection for which this device is the target has timed out. The network statusindicator shall return to steady green only when all timed out Exclusive Owner connections arere-established.Steady Red Duplicate IP If the device has detected a non-recoverable major fault, the module status indicator shall be steady red.Flashing Greenand RedSelf-test While the device is performing its power up testing, the module status indicator shall be flashing greenand red.
