4-28 Configuring Your ServerBMC LAN Configuration submenuWhen [BMC LAN Configuration] is selected in the Server menu and then the Enter key is pressed,the screen below is displayed.IMPORTANT: The management-dedicated LAN connector cannot beused for a different LAN.For details about the options, see the following table.Option Parameters DescriptionBMC NetworkConfiguration– –Shared BMC LAN DisabledEnabledSet this option to [Disabled] if the managementLAN port is used.If this option is set to [Enabled], it is notpossible to use LAN1 as both a normal andmanagement LAN, so the management LANport becomes unavailable.LAN ConnectionType[Auto Negotiation]100Mbps Full Duplex100Mbps Half Duplex10Mbps Full Duplex10Mbps Half DuplexSpecify the connection type for managementLAN port.IP Address [192.168.1.1] Specify an IP address for the managementLAN.Subnet Mask [255.255.255.0] Specify a subnet mask for the managementLAN.Default Gateway [0.0.0.0] Specify a default gateway for the managementLAN.
