Installing the Operating System with Express Setup 5-919. On the [Paging file size for each drive] box, specify as follows:– A value larger than the recommended size shown in [Total paging file size for alldrives] for [Initial size]– A value larger than the [Initial size] for [Maximum size]Then click [Set].IMPORTANT: The above-mentioned paging file size is recommended forcollecting debug information (memory dump). The paging file withinitial size large enough to store the dump file in the boot drive isrequired.Correct debug information might not be able to be collected due tovirtual memory shortage when the paging file is insufficient, so setan enough size of the paging file with the entire system. For more information on "Recommended" value, see "About theSystem Partition Size" described earlier. In case the memory is expanded, re-specify the paging file to suitthe new memory size.10. Click [OK].The message to restart the system may appear according to the modified specification.In such case, follow the message to restart the system.When the system is Windows Server 2003Follow the procedure below to specify.1. Select [Control Panel] and click [System].The [System Properties] dialog box appears.2. Select [Advanced] tab.3. Click [Settings] on the [Startup and Recovery] group box.
