5-78 Installing the Operating System with Express Setup WOLRefer to the following procedure for WOL (Wake On LAN) setting.When PROSet is not installed1. Start Device Manager.2. Point to [Network adapters] and double click following adapter.Open the adapter [Properties].[Intel(R) 82576 Gigabit Dual Port Server Network Connection][Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]3. Click [Power Management] tab and change setting in [Wake On LAN] according to thefollowing list.Setting item Using WOL Not usingWOL"Allow the computer to turn off this device to save power" ON ON"Allow this device to bring the computer out of standby" ON or OFF OFF4. Click [Advanced] tab and point to [Enable PME].5. Set in [Value] as follows.– Using WOL: ON– Not using WOL: OFF6. Click [OK].7. Restart the system.
