Configuring Your Server 4-29Option Parameters DescriptionDHCP DisabledEnabledSet to [Enabled] to obtain an IP address fromthe DHCP server automatically. If you intend tospecify an IP address manually, set to[Disabled].Web Interface – –HTTP DisabledEnabledSet to [Enabled] to use HTTP communicationfor the Web interface.HTTP PortNumber[80] Specify the TCP port number which themanagement LAN uses for HTTPcommunication.HTTPS DisabledEnabledSet to [Enabled] to use HTTPS communicationfor the Web interface.HTTPS PortNumber[443] Specify the TCP port number that themanagement LAN uses for HTTPScommunication.Command LineInterface– –Telnet DisabledEnabledSet to [Enabled] to use Telnet communicationas a command line interface.Telnet PortNumber[23] Specify the TCP port number to be used forTelnet communication.SSH DisabledEnabledSet to [Enabled] to use SSH communication asa command line interface.SSH Port Number [22] Specify the TCP port number to be used forSSH communication.Clear BMCConfiguration[No]YesPress Enter and select "Yes" to initialize theBMC configuration.[ ]: Factory-set
