Configuring Your Server 4-49Operating Procedures for Configuration UtilityCreating/Adding ConfigurationRun LSI Software RAID Configuration UtilitySet new configuration information (pack/virtual drive settings)Check the virtual drive settingsInitialize virtual drivePerform Consistency CheckExit LSI Software RAID Configuration Utility1. Run LSI Software RAID Configuration Utility.2. Select "Configure" → "New Configuration" from the TOP menu (Management Menu).Select "View/add Configuration" to add configuration.IMPORTANT: Creating a configuration using "New Configuration" menu clearsthe existing configuration information. To add configurationinformation to the existing configuration, select "View/addConfiguration." You cannot create Striping of RAID1 or set the virtual drivecapacity on "Easy Configuration" menu.Use "New Configuration" or "View/Add Configuration" instead.
