Installing the Operating System with Express Setup 5-23LAN Driver Setting Link SpeedLAN drivers will be installed automatically, but the link speed and Duplex mode need to bespecified manually.1. Open the [Device Manager].2. Double-click [(Network Adapter Name)] in the list.3. Click the [Link Speed] and specify the [Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK].5. Restart the system. WOLRefer to the following procedure for WOL (Wake On LAN) setting.1. Start Device Manager.2. Point to [Network adapters] and double click following adapter.Open the adapter [Properties].[Intel(R) 82576 Gigabit Dual Port Server Network Connection][Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]3. Click [Power Management] tab and change setting in [Wake On LAN] according to thefollowing list.Setting item Using WOL Not using WOL"Wake On Magic Packet" ON OFF"Wake on Magic Packet from power off state" ON OFF"Wake on Link" OFF OFF"Wake on Pattern Match" OFF OFFNOTES: [Power Saver Options] setting is not necessary to change. Above setting will be maintained until manually resetting areexecuted.4. Click [OK].5. Restart the system.IMPORTANT: The parameters of [Wake On LAN] will not exist, if thenetwork ports are not available for WOL.
