G-12 Installing Windows Server 200312. Press S.IMPORTANT: Insert the Windows Server 2003 OEM-Disk forEXPRESSBUILDER into the floppy disk drive. If the floppy diskdrive has already contained Windows Server 2003 OEM-Disk forEXPRESSBUILDER, you do not need to insert the Windows Server2003 OEM-Disk for EXPRESSBUILDER. If you have created the OEM-Disk into the Flash FDD, connect theFlash FDD before you start the system.The screen of Step 6 is displayed. Press Enter, and go to Step 13.Press Enter, and go to Step 14.13. A list of mass storage devices is displayed.Select the [LSI Fusion-MPT SAS Driver (Server 2003 32-bit)] and press Enter.The screen of Step 5 is displayed.Press Enter, and go to Step 14.14. When the following message is shown, press Enter to start "Welcome to Setup".IMPORTANT: If you install Windows Server 2003 on the hard disklarger than 2,097,152MB (2TB), you can specify only a value equal toor less than 2,097,152MB as partition size.15. When the installation of Windows Server 2003 has finished, the system rebootsautomatically.– Windows Server 2003 has been installed: Go to the step 19.– Windows Server 2003 R2 has been installed: Go to the step 16.
