6-24 Installing and Using UtilitiesManual SetupWindowsYou can start the setup program of Universal RAID Utility from [Autorun Menu].Click [Setup Software] → [Universal RAID Utility] in [Autorun Menu].You need to install the following software. Microsoft .NET Framework 2.0 or later The Runtime component of the Microsoft Visual C++ 2005 SP1You can install these software from [Autorun Menu] too.Click [Setup Windows] → [Install the .NET Framework Ver 2.0 Redistributable Package (x86)] (IfCPU architecture is x64, [Install the .NET Framework Ver2.0 Redistributable Package (x64)]) in[Autorun Menu] for the setup of Microsoft.NET Framework 2.0.Click [Setup Windows] → [Install the Microsoft Visual C++ 2005 SP1 RedistributablePackage(x86)] (Use the x86 package whatever the CPU architecture may be.) for the setup of theRuntime component of the Microsoft Visual C++ 2005 SP1.LinuxYou need to run the setup.sh in the install image of Universal RAID Utility.There is the install image of Universal RAID Utility in the following directory of NECEXPRESSBUILDER./BBB/lnx/pp/uraidutlThe part of BBB is BBB of the medium number (5.AA-BBB.CC) of NEC EXPRESSBUILDER.Easy ConfigurationYou can not use the function of Easy Configuration to LSI Embedded MegaRAID.Creating Logical Drive of RAID 6You must use four or larger Physical Devices for creating the Logical Drive of RAID 6 by UniversalRAID Utility. If you want to create the Logical Drive from three Physical Devices, you need to useWebBIOS.
