F-22 Installing Windows Server 2003 x64 EditionsLAN Driver SettingLink SpeedLAN drivers will be installed automatically, but the link speed and Duplex mode need to bespecified manually.IP addresses is not be able to set when the "Internet Protocol (TCP/IP)" check box OFF.This phenomenon will occur with the certain condition.Check ON the "Internet Protocol (TCP/IP)" check box and IP address will be able to set.When PROSet is not installed1. Open the [Device Manager].2. Double-click [(Network Adapter Name)] in the list.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK].5. Restart the system.When PROSet is installed1. Open the [Device Manager].2. Double-click [(Network Adapter Name)] in the list.3. Click the [Link Speed] and specify the [Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK].5. Restart the system.
