Configuring Your Server 4-55Setting Hot SpareInstall a hard disk driveRun LSI Software RAID Configuration UtilitySet for hot spare.Exit LSI Software RAID Configuration Utility1. Install a hard disk drive to be used as hot spare, and then turn on the server.2. Run LSI Software RAID Configuration Utility.3. Select "Objects" → "Physical Drive" from the TOP menu.The "Objects - PHYSICAL DRIVES SELECTION MENU" screen appears.4. Move the cursor onto the hard disk drive to be used as hot spare and press Enter.5. The "Port #X" screen appears. Select "Make HotSpare."6. A confirmation screen appears. Select "Yes."The hard disk drive indication is changed to "HOTSP."
