8-60 TroubleshootingMaintenance Tools with Remote ConsoleThis subsection describes the procedures for using Maintenance Tools with remote console.Maintenance Tools contains the remote console feature that allows the system administrator to setup the server from the management workstation (management PC) via the network or the server'sCOM B (serial) port.IMPORTANT: Do not use this feature on any other computer than the server, or onany other server obtained without the NEC EXPRESSBUILDER.Doing so may cause a failure of the server. Be sure to select [Tool menu (Redirection mode)] in [Bootselection] menu from the remote console.StartingThe following two methods are available to start the server. Running Maintenance Tools from the management PC via LAN Running Maintenance Tools from the management PC via direct connection (COM B)For the procedure for starting Maintenance Tools with Remote Console, refer to the onlinedocument of NEC ESMPRO Manager.
