Troubleshooting 8-17Displayed Error Message Description Recommended ActionC021 System Voltage out of therange.A system voltage abnormalitywas detected.Contact your servicerepresentative.C040 SROM data read error SROM data reading errorC041 SROM data checksm bad SROM data checksum errorC060 SMBus device Errordetected.An error was detected for theSM Bus.C061 1st SMBus device Errordetected.An error was detected for the 1stSM Bus.C062 2nd SMBus device Errordetected.An error was detected for the2nd SM Bus.C063 3rd SMBus device Errordetected.An error was detected for the3rd SM Bus.C064 4th SMBus device Errordetected.An error was detected for the4th SM Bus.C065 5th SMBus device Errordetected.An error was detected for the5th SM Bus.C066 6th SMBus device Errordetected.An error was detected for the6th SM Bus.C101 BMC Memory Test Failed. BMC device (chip) error Turn off the power, andthen restart the server.If this does not resolvethe problem, contactyour servicerepresentative.C102 BMC Firmware Code AreaCRC check failed.C103 BMC core hardware failure.C104 BMC IBF or OBF checkfailed.Accessing the BMC addressfailed.C105 BMC SEL area full. There is not enough capacity towrite the system event log.Start up the BIOS setuputility, select [Clear AllError Logs] under[Event LogConfiguration] on the[Server] menu, andthen press the Enterkey to delete the logs.
