5-52 Installing the Operating System with Express SetupLAN Driver Setting Link SpeedLAN drivers will be installed automatically, but the link speed and Duplex mode need to bespecified manually.1. Open the [Device Manager].2. Double-click [(Network Adapter Name)] in the list.3. Click the [Link Speed] and specify the [Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK].5. Restart the system. WOLRefer to the following procedure for WOL (Wake On LAN) setting.1. Start Device Manager.2. Point to [Network adapters] and double click following adapter.Open the adapter [Properties].[Intel(R) 82576 Gigabit Dual Port Server Network Connection][Intel(R) 82576 Gigabit Dual Port Server Network Connection #2]3. Click [Power Management] tab and change setting in [Wake On LAN] according to thefollowing list.Setting item Using WOL Not using WOL"Wake On Directed Packet" ON or OFF OFF"Wake On Magic Packet" ON OFF"Wake on Magic Packet from power off state" ON OFF"Wake on Link" OFF OFFIMPORTANT: WOL does not work by Directed Packet (*1) onshutdown state even "Wake On Directed Packet" is "ON". (WOL workby DirectedPacket on sleep and hibernate state.)*1 The packet which includes Ethernet address of adapter in EthernetHeader or the Packet including the IP address assigned by IP Headerto adapter.
