8-38 TroubleshootingThere are some cases that an event log is registered as follows when you operateWindows Server 2003 R2:Source: IPMIDRVType: ErrorEvent ID: 1001Description: The IPMI device driver attempted to determine if the system supported an IPMI BMCdevice. The driver attempted to detect the presence of the IPMI BMC by searching theSMBIOS for Type 38 record. But either no record was found or the record was notcompatible with the version of the device driver.If a SMBIOS Type 38 record was detected, the Dump Data field of the event containsa binary representation of the record.→ If you use "Hardware Management" which is provided by Windows Server 2003R2, above-shown event log will be registered.For more details, refer to "Enabling Microsoft Windows Server 2003 R2Hardware Management" on the following site.[NEC Express5800 Web Site]http://www.nec.co.jp/express/download/W2K3_R2The system displays the message below and fails to log on:Windows Product ActivationThis copy of Windows must be activated with Microsoft before you cancontinue. You cannot log on until you activate Windows.To shut down the computer, click Cancel.YES NO Cancel→ In Windows Server 2003, the above message will be displayed if you use theoperating system without executing the license authentication. Select "Yes", andexecute the procedure for license authentication.Cannot install the operating system correctly: Did you confirm the notes on installing the operating system?→ See Chapter 6.
