190 / ETSI, MCDN and Network featuresModular ICS 7.1 Installer Guide N0130943 02If the alerting extension is not the CLID extension for that line,the line appearance can be pressed to briefly display theinformation. Pressing ≤°⁄⁄ or INFO while the call isactive invokes Call Info. Call Info on MCDN SL-1 displaysthe redirecting number and the reason for the redirection.Note: When Norstar requests that an incoming call beredirected by the distance network, Norstar does notinform the network of the redirecting DN. In this case,the diverted-to party will not see the diverting partyDN.Malicious caller identification (MCID)The MCID feature allows you to use ≤°·‡ to havecall information recorded on the central office system for anincoming call on a specific line (EURO ISDN lines, only).The user must invoke the feature code without hanging up, andwithin 30 seconds (time varies on different networks) after thecaller hangs up.Note: This feature must be supplied by your service providedand allowed in network programming to work. Checkwith your system administrator.The following information registers on the network:• called party number• calling party number• local time and date of the invocation in the network servingthe called user• service provider option: calling party subaddress, ifprovided by calling user)
