534 / Port/DN statusModular ICS 7.1 Installer Guide N0130943 02Checking the state of the device Installer password requiredFrom the Norstar device identification display.1. Press STATE.The display shows one of the states listed in the table thatfollows. If you want, you can disable or enable the device.Refer to Disabling a device on page 535 or Examples ofdisplay messages on page 535.2. Press OK to return to the device identification display.How the device state is shown on the displayDisplay State of deviceBusyDISABLE OKThe device is in use.Disabling... OKThe device is being disabled.Enabling...OKThe device is being enabled.IdleDISABLE OKThe device is not in use.UnequippedDISABLE OKThere is no device connected to that port.Disabled by userENABLE OKThe device has been disabled bysomeone running a Maintenance session.Disabled by sys.ENABLE OKThe device has been disabled by thesystem because it is faulty or because atest is running.Not availableDISABLE OKThere is no state available.
