Hardware / 501N0130943 02 Modular ICS 7.1 Installer GuideThe following table shows the different options.Discon timerDisconnect timer allows you to specify the duration of anOpen Switch Interval (OSI) before a call on a supervisedexternal line is considered disconnected.Press CHANGE to select the setting: 60, 100, 260, 460, or 600milliseconds.Answer timerAnswer timer allows you to set the minimum duration of ananswer signal before a call is considered to be answered.Press CHANGE to select the setting: 1, 2, 3, 4 or 5 seconds.Note: This setting only appears for DTI (T1) and E&M TrunkCartridges.ServiceProtocol FX 800 I-800 SDS 900NI-2 SID CDN n/a n/a n/aDMS-100 SID SID or CDN n/a n/a n/aDMS-250 SID SID or CDN n/a n/a SID or CDN4ESS n/a CDN CDN CDN CDNTips - Disconnect Supervision is assigned to each linewith the Trunk mode setting. See Trunk/Line data on page 361.This setting must match the setting for the line at the centraloffice (CO).This setting only appears for DTI (T1) and Loop TrunkCartridges.
