System prgrming / 471N0130943 02 Modular ICS 7.1 Installer GuideOutgoing Name and Number BlockingWhen activated, ≤°⁄· blocks the outgoing name andnumber on a per call basis. When this feature is used, the callis flagged to the CO so that the name and number will not bepresented to the person being called.On analog and BRI trunks, a call blocking digit sequence issent to the CO before sending the dialout digits. You canchange this digit in a Norstar programming session and set itto the digit sequence recognized by the local CO for name andnumber blocking.This programming is done in the main program heading TelcoFeatures. To program the Name and Number blocking digit,start with the display showing Telco features.Note: Step 1 through 3 are only for analog and BRI trunks.1. Press ≠. The display shows VMsg ctr tel#s.2. Press ‘ until the display shows ONN Blocking:.3. Press ≠. The display shows Tone:None. You canchoose F78, (0-9), *, #.4. Press CHANGE to enter a new tone dialing Name andNumber blocking digit sequence.5. Press ‘. The display shows Pulse:None. Youcan choose F78, (0-9), *, #.6. Press CHANGE to enter a new pulse dialing Name andNumber blocking digit sequence.
