Module status / 537N0130943 02 Modular ICS 7.1 Installer GuideModule statusModule status allows you to:• look at the inventory of Station Modules, Trunk Modules,Data modules, and modules inside the IntegratedCommunication System (ICS)• check the number of Trunk Cartridges in a module• check the state of the module or its cartridges• disable or enable the module or its cartridges• isolate any malfunctioning modules• disable a module before replacing it• clear a hung line by disabling and enabling the affectedTrunk CartridgeLooking at the module inventory Installer password requiredStart with the display showing Port/DN status.1. Press ‘. The display shows Module status.2. Press ≠. The display shows Show module:.3. Enter the module number.Tips - Modules 1 and 2 are located inside the ICS.Module 1 connects telephones.Module 2 connects Trunk Cartridges.Tips - Norstar devices may occupy both the B1 and B2channels. This may increase the number of devices indicatedon the module inventory display. The display is different forAnalog Station Modules (ASM) where it will show either8 sets on ASM or 16 sets on ASM.
