250 / Fiber cable management systemModular ICS 7.1 Installer Guide N0130943 02Using the fiber cable management systemTo facilitate the installation of systems using fiber cables, theFiber Cable Management System ensures that power cords arelocated outside of the cable tray. It also ensures that a 2.6 cm(1 in.) space exists between the ICS module and othermodules.The following hardware components are used in the FiberCable Management System:• Fiber Comb (one per system): The Fiber Comb, isinstalled, using an adhesive back, on the ICS, below thefiber expansion cartridges. The Fiber Comb keeps the fibercable in place and prevents the cables from being pinchedbetween doors. Use the comb to keep fiber cablesorganized as they are routed to each Station Module, asshown in the 12-port example below.• Fiber Cable Guide (three per system): install in theentrance and exit of the cable trough. The Fiber CableGuide allows fibers to be correctly routed to maintain aminimum bend radius when going through the cabletrough.SM14SM13SM12SM11SM10SM09
