316 / Copying telephone programmingModular ICS 7.1 Installer Guide N0130943 02Copying telephone programmingCopying is done by using COPY under Terminals&Sets. Youcan copy programming from one telephone to anothertelephone, to a range of telephones, or to all telephones.1. At Terminals&Sets ˆ, press ≠.2. Enter the internal number (DN) of the telephone fromwhich you wish to copy programming.3. Press COPY.4. Select what programming will be copied:• SYSTEM – the system administration programming(system data) of a telephoneOR• SYSTEM+USER – the system administrationprogramming PLUS the programming for a particulartelephone (user data)See the tables starting on page 318 to see which settingswill and will not be copied with system and user data.5. Press ‘, then press CHANGE to select thetelephone or telephones which will be programmed withthe copied data: SINGLE, RANGE, ALL.You can copy programming to telephones which are notyet hooked up to the system (unequipped).6. Press ‘, then CHANGE to select which telephoneswill be programmed: Only equipped DNs, All set DNs.This is not necessary when copying to a single telephone.
