Event messages / 559N0130943 02 Modular ICS 7.1 Installer GuideEvent message 799Event message 799 indicates a call processing error hasoccurred on an ISDN line. The event number is followed by anumber representing the line or loop number, and a code forthe type of error.Evt:698 S8 incorrect software key enteredEVT799-00040BS7a call processing error on the fourth BRI loop; seeEvent message 799 on page 559.Evt:822 S8 Alarm code 63 is sent because there are no DTMFreceivers for an incoming callEvt:882 S9 mobility data re-evaluation sequence initiatedEvt:883 S4 an invalid dial pulse signal was received by the DTIEvt:992 S6 auto attendant errorEVT799-XXXX YYS7 In this example, the error has occurred on lineXXX and the error code is YY.ErrorcodeMeaning01 Internal software error. Cannot acquire the B-channel fromthe B-channel arbitrator.02 Internal software error. There is no free line available for thecall.03 A call that is not on the B-channel has been attempted.These kind of calls are part of EKTS service, which is notsupported by this version of the software. Check with yourservice provider to make sure your package does notinclude EKTS service.04 Internal software error. Failed to instantiate on the chain.05 Internal software error. Activation procedure failed.Event message The event message is recorded when…
