System prgrming / 467N0130943 02 Modular ICS 7.1 Installer GuideNat’nl length (profile 2, only) Installer password requiredThis feature allows you to change the number of digits that thesystem will expect to see for a national telephone number.1. Press CHANGE to select the setting: (default is 10).2. Press YES to save the new DN length.Make/Break (profile 2, only) Installer password requiredThis feature allows you to change the ratio of your system.1. Press CHANGE to select the setting to either 40/60 or 30/70.BusNameNorstar will display the name of the calling party when it isprovided both Private or Public ISDN PRI and BRI interfaces.The displayed name may include information such as theReceiving Calling Name, Receiving Redirected Name, and/orReceiving Connected Name. The outgoing name is thebusiness name concatenated with the set name.Tip - The outgoing name is not supported on BRI.Refer to Feature assignment (CLID alignment) on page 357.Network Name Display is an optional feature that is availablebased on the interface to which you are subscribed.
